KF-1000

• Able to work with or replace existing RFID Readers that uses Wiegan Protocol
• Battery back up for event memory
• Anti-Tamper Facility
• Aluminum casing for durability
• Cover lid offers extra protection for scanner
• Flexible communication options including Wiegand I/O, Ethernet, and RS232/422
• Can be used as standalone or in a network

FEATURE

• User Registration: 1000/4000 Users
• Transaction Memory Buffer: 8,192 Transactions / Unlimited when networked with PC
• Up to 64 connections using RS422 converter / Unlimited using TCP/IP
• FAR (False Acceptance Rate) = 0.00008 %
• FRR (False Rejection Rate) = 0.09 %
• Adjustable Fingerprint Recognition Level: 0-9 (10 Levels)
• Recognition Adjustment S/W (FDA) provided (Factory Set)
• KF-1000: 1 door controller
• Compatible Cards: All HID RF Cards
• Networking Software
• - PLA-64: Access Control Software
• Operation Mode

SPECIFICATION

CPU: 32 bit RISC-DSP Microprocessor
Power: 12V DC 1A
Dimensions: N/A
Operating Temperature: -10°c - + 50°c
Operating Humidity: 10% - 90%
Verification Time: 0.5 - 1 Sec.
RF Card Reading Range: 5cm
Communication: RS-232/422 (1.2 Km) and TCP/IP
In/Out point: 4 In / 2 Out
Material: Aluminum
Recommended Cable
- ALPHA 6212C, 2-Twisted Pair, and Shield Cable with Drain Wire
- Belden No. 9329-22 AWG for 1000 ft (305m) maximum distance
- Belden No. 9369-18 AWG for 4000 ft (1220m) maximum distance
Certifications:
Options
- Color: Blue/Silver
- Memory: 1000/4000 Users
- Expendable Event Memory

FP300 Door Lock
(Shiny Silver Finish)

• Fingerprint Lock
• Convenient One-Touch System
• Security First Design
• Remarkable Durability
• Never loose your keys again (no key required)
• Memory Capacity (99 fingerprints)
• CE Approved

FEATURE

Convenient One-Touch System:
Simply touch the scanner with your fingertip without any risk of it being stolen or copied like cards or keys can. Remembering any password is just optional. It offers both security and convenience.

Security First Design:
FP-300 is designed to comply with global Fire Safety regulations. The door can always be opened from the inside providing a quick exit in case of an emergency or fire. The L shaped lever reduces the chances of clothing or other items getting caught.

Easy-to-Operate Key Pad:
User registration, deletion, and mode programming are done through the keypad. All operations can be completed in about 10 seconds and does not require any special skill or training.

Remarkable Durability:
FP-300 has a virtually unbreakable and scratch resistant sensor window. The FP-300 is made with the finest materials, using a fantastic stainless steel finish. It is highly anti-static and resistant against physical damages.

Memory Capacity 99 fingerprints (upgradable to 640 fingerprints, contact ukbiometrics)
FP-300 has high memory capacity with high speed and high efficiency that enables you to enroll up to 99 different fingerprints as a stand alone unit. The unit can easily extend to 640 at your demand.

Safety ‘Dead Bolt’
You may bolt the door by turning the safety bolt knob inside. No one else can open the door from outside.

Power Supply:
FP-300 is powered by 5 AA 1.5V alkaline batteries. The power consumption is extremely low and it can support 4000 operations. For a typical family these batteries will last 6-12 months. High quality – long life alkaline batteries is recommended.

Stand-by Power supply:
In case of low battery you can plug in a standard 9 Volt battery into the socket below the keypad and the FP-300 will allow you to unlock the door using your fingerprint.

Malicious Operation-forbidden:
Inputting the wrong fingerprint more than five times would activate the system dormancy for 5 minutes to protect against any intentional malicious operation of the lock.

Modern Appearance and Advanced Biomechanical Design:
Aesthetically-pleasing, FP-300, combines a modern appearance with a futuristic bio-mechanical design.

SPECIFICATION


# Outside Dimension: 224mm L x 80mm W x 38mm D
# Inside Dimension: 224mm L x 80mm W x 38mm D
# Material: Die Cast Aluminum Alloy Color: Silver

# Battery (For System) DC1.5V (AA, LR6) x 5

# Battery (For Emergency) DC9V (6LR61)

# Recognition Sensor: Optical lens type

# False Acceptance Rate: Less than 0.01%

# Processing Time: Less than 1 second

# Number of Users: 99-640 fingerprints
# Emergency Device: PIN Override
# Temperature: -20 to 50°C
# Moisture: 10 to 80% Relative Humidity

# Voltage: 5.0 to 6.4V

# Safety First Design Meets Fire Safety Codes.

# Battery Exchange Audible warning to replace the batteries

Manufacture Site

View Pass Fingerprint Intercom System

• Hightech access control system designed for home and office
• Easy to read LED with Voice Command
• Multi-Security product (Videophone + Camera + Fingerprint Reader + Card Reader + Key Pad)
• Built-in camera with microphone
• Work as a high-tech intercom system
• Easily programmed with IDC (Indoor Controller)
• HHP (Hand Held Programmer) also work as emergency door opening and data back-up function
• Flexible communication options including Wiegand I/O, RS232/422, and TCP/IP (VPO-411 Only)

FEATURE

• User Registration
  - VPO-411: 1000 Users / 4000 Users

• Transaction Memory Buffer
  - VPO-411: 8,192 Transactions / Unlimited when networked with PC
• Up to 64 connections using RS422 converter / Unlimited using TCP/IP
• Separate Controller Type, IDC (Indoor Controller)
• Audio Visual Indicator:
  Red LED: Access denied / Green LED: Access granted / with Voice Command
• FAR (False Acceptance Rate) = 0.00008 %
• FRR (False Rejection Rate) = 0.09 %
• Adjustable Fingerprint Recognition Level: 0-9 (10 levels)
• Recognition Adjustment S/W (Factory Set)
• Compatible Cards: All HID RF Cards
• Networking Software
  - PLA-64: Access Control Software
  - PLAT-4000: Access Control and Time & Attendance Software
• Programming Method : IDC (Indoor Controller)
• Operation Mode
  

SPECIFICATION
CPU : 32 bit RISC DSP
Power : 12V DC 1A
Dimensions :H 250mm X W 170mm X D 120mm
Operating Temperature :-10°c - + 50°c
Operating Humidity :10% - 90%
Verification Time :0.5 - 1 Sec.
RF Card Reading Range :5cm
Communication :RS-232/422(1.2Km), TCP/IP
In/Out point :4 In / 2 Out
Material :ABS (Polycarbonate)
Compatible Video Phone
- 4 wire connection type
- Exit Button required
Certifications
- CE Mark, FCC
Options
- Color: White/Persian Blue
- Memory
- Battery Backup Connection

RRP From : £1699.95 Exc.VAT